Pocket Reference

The tables, formulas, and code limits electricians reach for every day — organized by topic.

REFERENCE TOPIC

Formulas

Ohm's law, single-phase and three-phase power, efficiency, and voltage drop.

Ohm's law and power (DC or resistive AC)

Solve forFormula
Voltage from current and resistanceE = I × R
Current from voltage and resistanceI = E ÷ R
Resistance from voltage and currentR = E ÷ I
Power from voltage and currentP = E × I
Power from current and resistanceP = I² × R
Power from voltage and resistanceP = E² ÷ R
Efficiencyeff = (output ÷ input) × 100

Single-phase AC

Solve forFormula
Apparent powerkVA = (E × I) ÷ 1,000
Current from kVAI = (kVA × 1,000) ÷ E
Real powerkW = (E × I × PF) ÷ 1,000
Power factorPF = kW ÷ kVA
Motor horsepowerHP = (E × I × PF × eff) ÷ 746

Three-phase AC

Solve forFormula
Apparent powerkVA = (E × I × 1.732) ÷ 1,000
Current from kVAI = (kVA × 1,000) ÷ (E × 1.732)
Real powerkW = (E × I × 1.732 × PF) ÷ 1,000
Motor horsepowerHP = (E × I × 1.732 × PF × eff) ÷ 746
Full-load amps from HPFLA = (HP × 746) ÷ (E × 1.732 × PF × eff)

Voltage drop (approximate, K method)

Informational Note, 210.19(A)
Solve forFormula
Single-phase dropVD = (2 × K × I × L) ÷ CM
Three-phase dropVD = (1.732 × K × I × L) ÷ CM
Required circular milsCM = (2 × K × I × L) ÷ VD
Percent drop%VD = (VD ÷ E) × 100

K = 12.9 for copper, 21.2 for aluminum at 75°C. L is the one-way circuit length in feet. Keep total drop at 3% for a branch circuit and 5% for the feeder plus branch circuit combined.

Identities worth memorizing

  • 1 horsepower = 746 watts
  • 1 kW = 1,000 watts
  • 1 kVA = 1,000 volt-amperes
  • Three-phase multiplier = 1.732 (square root of 3)
  • 1 mil = 0.001 inch
  • Circular mils = diameter in mils squared
  • 1 inch = 25.4 mm
  • 1 foot = 0.3048 m

Reference only. Verify every value against the code edition adopted in your jurisdiction and the manufacturer's listing before installing.

Run the full NEC calculator

Electrical Safety Compass is a supplemental study aid and field reference tool only. It is designed to help prepare apprentices for their licensing exams and to assist working electricians in the field. It does not replace any required classroom instruction, formal apprenticeship coursework, or supervised on-the-job training mandated by your state, licensing board, or apprenticeship program. Always complete all legally required education and supervised hours before performing electrical work.